Legal tint limits at a glance

VLT is the share of light the window must let through — a lower number is darker film, and the reading includes the factory glass.

Utah window tint limits by window and vehicle type
Window Sedans SUVs, vans & trucks
Windshield Minimum 70% light transmittance. Nontransparent materials may be used along the top edge if they do not extend downward more than four inches from the top edge or beyond the AS-1 line, whichever is lowest, and in the lower left-hand corner provided they do not extend more than three inches to the right of the left edge or more than four inches above the bottom edge. Same as sedan — § 41-6a-1635 makes no SUV/van/multipurpose-vehicle distinction.
Front side 35% VLT or lighter 35% VLT or lighter
Back side No VLT limit No VLT limit
Rear No VLT limit No VLT limit

Dual side mirrors required if the rear is tinted? Yes — this state requires dual outside mirrors when the rear window is tinted.

Is my tint legal here?

Film darkness and glass darkness multiply. Enter the film you are considering and the VLT of the bare glass to get the number a meter would read.

70 for tinted OEM glass, 80 for clear

Net VLT 14% 20% film × 70% glass

    Pass/fail compares net VLT against the limits on this page only. Some states apply a measurement tolerance — see Measurement tolerance below — and none of this replaces a meter reading on your own glass.

    The rest of the rule

    Reflectivity

    Any windshield or window that is composed of, covered by, or treated with any material or component that presents a metallic or mirrored appearance is prohibited (§ 41-6a-1635(1)(c)). No numeric reflectance limit.

    Colors

    None specified beyond the metallic/mirrored-appearance prohibition (statute read in full).

    Medical exemption

    None. § 41-6a-1635 contains no medical exemption (statute read in full), and none appears on the Utah Highway Patrol's window tint requirements page.

    Stickers & certification

    None required — § 41-6a-1635 imposes no label, sticker or installer certificate.

    Measurement tolerance

    5% — § 41-6a-1635(1)(b): a front side window must allow at least 35% light transmittance 'with no more than a 5% variance observed by a peace officer metering the light transmittance.'

    Penalties

    Infraction (§ 41-6a-1635(9)). § 41-6a-1635(10) bars a peace officer from requesting that the Motor Vehicle Division or Driver License Division revoke or suspend a registration or driver licence for one or more violations of the windshield (1)(a) or front-side-window (1)(b) standards. § 41-6a-1635(7) separately prohibits having for sale, selling, offering for sale, installing, covering or treating a windshield or window in violation of the section.

    Notes

    Front side windows dropped from 43% to 35% effective May 7, 2025 (ch. 205, 2025 General Session); windowtintlaws.us still publishes the stale 43% figure, and tinting-laws.com attributes the 35% to a 2022 change. Rear windows, INCLUDING rear side windows located behind the vehicle operator, may carry nontransparent material of any darkness (§ 41-6a-1635(3)(c)) on every body type. § 41-6a-1635(5) is the mirror rule: except for windshield material permitted under (3)(a) and (3)(b), a vehicle with tinting or nontransparent material on ANY window must have rear-view mirrors mounted on both the left and right sides reflecting to the driver a view of the highway to the rear. § 41-6a-1635(4): a windshield or window is considered compliant if it meets the federal statutes and regulations for motor vehicle window composition, covering, light transmittance and treatment. § 41-6a-1635(8) requires anyone subject to the Federal Motor Vehicle Safety Standards (manufacturers, distributors, dealers, importers, repair businesses) to comply with the federal tinting standards. le.utah.gov renders statute text with JavaScript, so the section was read in a real browser rather than by plain fetch.

    Utah tint questions

    What is the darkest legal tint in Utah?

    For a sedan in Utah, front side windows must let at least 35% of light through, no number is stated for the back side windows, and none for the rear window. Lower VLT means darker glass, so those percentages are floors, not targets, and the meter reads the film and the factory glass together.

    Is 20% tint legal in Utah?

    No, not on the front side windows. Utah requires at least 35% VLT there and 20% is darker than that, before you even account for the factory glass, which makes the reading darker still. Behind the driver the statute states no VLT number, so 20% may be allowed on the back side and rear windows — read the notes on this page and confirm with the DMV.

    Can I tint the windshield in Utah?

    Utah's rule for the windshield: Minimum 70% light transmittance. Nontransparent materials may be used along the top edge if they do not extend downward more than four inches from the top edge or beyond the AS-1 line, whichever is lowest, and in the lower left-hand corner provided they do not extend more than three inches to the right of the left edge or more than four inches above the bottom edge.

    Does Utah allow a medical exemption for darker tint?

    What the source says: None. § 41-6a-1635 contains no medical exemption (statute read in full), and none appears on the Utah Highway Patrol's window tint requirements page. Confirm the current process with the agency named before you have film installed.

    Do I need a tint sticker or certificate in Utah?

    None required — § 41-6a-1635 imposes no label, sticker or installer certificate.

    Where this comes from

    Statute cited: Utah Code § 41-6a-1635 (Windshields and windows — Tinting — Obstructions reducing visibility — Wipers — Prohibitions), effective May 7, 2025; amended by ch. 205, 2025 General Session

    Checked against the state's own statute or DMV page on September 14, 2026. Laws change; if you find a newer rule, email admin@getpeelboard.com.

    ← All 51 state tint laws